BarTech - Analog Focus Device Package

The BFD (Bartech Focus Device) exceeds the performance of the old standards (Seitz, WRC-4) at a fraction of the price.

As low as $2,100.00

Its compatibility with existing motors (Heden, ZB/SLD, FMG-6) allows the use of readily available used equipment as well as the new M-One motor. Its modular approach and interchangeable components allow you to start simple and build your way up to a full featured system, while providing back-ups in case of equipment failure.
More Information
Model IDK173
In Depth
  • Dimensions/Weight: approx. 7" x 3½" x 1½" / 1½ lbs.)
  • Power Consumption: 30 mA @ 7 to 15 VDC (9 mA in low power mode)
  • RF Transmission: 902-928 MHZ Single frequency, part 15 FCC compliant
  • Resolution: 12-bits (4096 steps), all steps always used
  • Data Update Rate: 350+ transmissions/second
  • Transmission Delay: 3 milliseconds
  • Dimensions/Weight:: approx. 4½" by 3½" by 1½" / approx. 11 oz.
  • Power Consumption: 50 milliamps @ 11-17VDC (Motor off) up to 5 amps maximum when driving a motor
  • Power Output to Motor: 2 amps maximum @ 18 VDC (36 watts)
  • 900 MHz Data Transmission, 8 Selectable Sub-channels
  • Rotary Style Control Module That Can Lock Together to Other Units For Multichannel Operation (Focus unit shown)
  • Interchangeable 1 Channel Receiver/Amplifier Modules, each with Remote Camera Run Outputs
  • 12-bit Resolution with All 12-bits Always Available (A First!)
  • Fast, Simple One-Pass Manual Lens Calibration
  • Control Modules Powered by an Inexpensive 9V Battery (18 hours of operation)
  • Direct Potentiometer Input to Receiver/Amp for Servo-type Operation, or Direct Connect Transmitter to Receiver (Hard Wire)
  • Automatic Standby Battery Saver Mode & Low Battery Indicator
  • Automatic Motor Shut Down to Save Power
  • Write Your Own Review
    You're reviewing:BarTech - Analog Focus Device Package
    Your Rating