Extend the functionality and features of your RED® WEAPON, SCARLET-W & RAVEN DSMC2 cameras with advanced signal and power I/O and lens control integrated OMOD™ camera modules from OFFHOLLYWOOD. The first authorized 3rd Party modules for RED DSMC2 cameras.
Directly attach an OMOD TX wireless video transmitter to any OMOD and then attach any DSMC2 compatible battery module onto the back of the OMOD TX for cable free wireless video transmission. OMOD TX MR (medium range) pairs with existing TERADEK BOLT 600 or PARALINX Arrow-X receivers and OMOD TX LR (long range) pairs with existing TERADEK BOLT 2000 or PARALINX TOMAHAWK receivers. In addition, both OMOD TX MR and OMOD TX LR will pair with TERADEK Bolt Sidekick Receivers.
WIRELESS LENS CONTROL
Integrated, internal RF lens control receiver options are available from cmotion and RTmotion/Latitude. Choose between cmotion compact/LCS, cmotion cvolution or RTmotion compatible OMOD models.
All OMOD models feature the standard DSMC 6-pin LEMO for DC power input to be fully compatible with legacy DSMC battery plate solutions and are also compatible with any DSMC2 Battery Module such as DSMC² REDVOLT XL MODULE or the Element Technica W – V Mount Battery Module and the W – Gold Mount Battery Module.
THE C3 ENGINE
Command, Control and Communications between the camera, cinematographer and crew on the connected set with The C3 Engine. The C3 Engine is cortex of the OMOD project. It is the post-modern, new-school film lab. On the camera. Designed with a flexible, customizable architecture powered by an independent processor and powerful FPGA in constant communication with the camera and connected applications. OMOD models with The C3 Engine feature advanced signal path options and color processing functionality with three independent HDSDI outputs. The DSMC2's HDMI monitor path is converted to 10 bit HDSDI with re-embedded timecode. CDL/1024 1D LUTs and 33x33x33 3D LUTs with ACES compliance, all in realtime, wirelessly to the camera. Realtime resolution and frame-rate conversions including 1080 60i output.
REAL-TIME HDR-2084 MONITORING
Output the leading HDR display standard, SMPTE 2084, real-time HDR images while shooting in addition to simultaneous monitoring standard dynamic range (SDR).
The C3 Engine is integrated with industry leading live-grading solutions Pomfort LiveGrade and CODEX Live and QTAKE Advanced Video Assist. Grade CDLs, and 3D LUTs live and wireless direct to the camera from a laptop or iOS device. Additional integrations are in the works.
The C3 Engine shares that same API and color processing hardware as Teredek's COLR. All functions that are, or become enabled on the COLR will be enabled in any OMOD model with The C3 Engine. Multiple OMODs can sync looks between each other and also sync with Teradek COLR units on other cameras.
MONITOR CALIBRATION INTEGRATION
OFFHOLLYWOOD and SpectraCal have collaborated to make any OMOD the ultimate calibration weapon. SpectraCal’s CalMAN software, the industry standard for ensuring accuracy in video displays, directly drives any OMOD that featured the The C3 Engine, providing an automatic and seamless experience. The OMOD delivers the necessary video test patterns at CalMAN’s direction. CalMAN measures the display’s output, creates a 3D display correction LUT, and loads it into the OMOD onto any specific SDI monitor output path allowing three independent outputs with monitor specific calibration LUTs.
WIRELESS INTERNAL TIMECODE & GENLOCK
The C3 Engine includes an integrated AMBIENT ACN TimeCode Module for receive/transmit and sync timecode wirelessly to any AMBIENT ACN slate or device like the Tiny Lockit or Master Lockit. Internally generated genlock assure precise shutter sync with the timecode.
Constantly communicating with the RED DSMC2 camera brain via REDLINK Command Protocol (RCP), the processor on The C3 Engine is constantly aware of all of the camera settings and can parse and even create RCP commands for custom functionality.
ADVANCED MASTER / SLAVE
The C3 Engine has a master / slave port that allows you to connect DSMC2 cameras together with one cable and and have another camera in "slave mode" and replicate all, or any specific defined parameters from the master camera, ideal for 3D applications. They are currently in development on the OMOD-VR BRAIN, which is small box that allows up to 12 OMODs with The C3 Engine to plug into it with a single cable from OME's Master / Slave port and give granular master slave control from one master camera to up to 11 slave cameras for VR and panorama productions - all with perfectly sync'd shutters and timecode.
META DATA MONSTER
The C3 Engine features a micro-sd card which can be used to load and store additional CDLs and 3D LUTs in addition to capturing meta data from external serial devices or integrated lens control systems. The C3 Engine's dual-band WiFi can be configured to push the captured data to the cloud without disturbing the camera functions or control via the cameras own internal WiFi.
OMOD PRO AUDIO
OMOD models that feature OMOD PRO AUDIO have best-in-class pre-amps, push-to-operate controls, high pass filters, AES digital audio input and per channel line / mic levels and Phantom power (+48V) empowering documentary filmmakers and ENG operators with professional, high quality in-camera audio.
AKS DSMC2 Camera Accessories, kits, and Cables
DSMC2 Standard Top Plate: The OFFHOLLYWOOD DSMC2 Standard Top Plate is a low profile (10mm high) top cheese-plate that attaches to any DSMC2 camera brain via 1/4-20 screws. It has 58 x 1/4-20 threaded mounting holes and 5 3/8-16 threaded mounting holes with ARRI accessory alignment patterns. Pogo pins allow run / stop trigger from DSMC2 handles that feature integrated record start/stop buttons and allow handles to be reversed and extend in the direction of the lens. Attach the RED 7" or 4.7" Touchscreen or LEMO Adapter without interference with the plate.
DSMC2 Riser Plate: The OFFHOLLYWOOD DSMC2 Riser Plate shims your DSMC2 camera up to standard accessory height standard bridge plates.
DSMC2 SIDE ARMS: Use OFFHOLLYWOOD DSMC2 SIDE ARMS to make a cage with our Riser and Top Plate options. Choose or combine three options:
Wide - our most popular arm clears the SSD Module on the Operator side of the camera and features (2) angles 3/8-16 holes in addition to (5) ARRI patterned 3/8-16 holes and (8) 1/4-20 holes. Can be used on both sides of the camera. (** improved design shipping June 1st)
Standard - this low profile arm clears the SIDEKICK and features (7) ARRI patterned 3/8-16 holes and (12) 1/4-20 holes. Can be used with or without an OMOD and can only be used on the "AC side" of the camera.
OMOD Low Profile - this arm is designed specifically for using an OMOD with your DSMC2 camera. Ultra-low profile that mounts in the space typically taken by RED's Base Expanders connectors - features (4) ARRI patterned 3/8-16 holes and (6) 1/4-20 holes
DSMC2 SIDE PLATE: This bracket attaches to any top plate or riser with 9mm spaced 1/4-20's. It features two captive 1/4-20 screws and have 1 x 3/8-16 tapped hole with ARRI pattern and 9 x 1/4-20 tapped holes with 9mm spacing. This plate can also be used to screw down horizontally onto a top plate or cheeseplate to add a 3/8-16mm tapped hole w/ARRI pattern.