Paralinx Tomahawk SDI Set

The Paralinx Tomahawk has a range of up to 2000 feet (600m) with default antennas (longer range possible with optional antennas) and still maintains an incredible sub 1ms latency glass-to-glass.
SKU
PAB16895

As low as $5,999.95

Customize Paralinx Tomahawk SDI Set
1 x Paralinx Tomahawk SDI 1:1 Kit   + $5,999.95

* Required Fields

Your Customization
Paralinx Tomahawk SDI Set
Paralinx Tomahawk SDI Set

In stock

$5,999.95

Summary

    The Paralinx Tomahawk has a range of up to 2000 feet (600m) with default antennas (longer range possible with optional antennas) and still maintains an incredible sub 1ms latency glass-to-glass. Both the Transmitter and Receiver feature 2-Pin Lemo power connectors capable of a wide 7-17V unregulated input voltage. The Tomahawk SDI system features 3G-SDI input (with loop-out) on the transmitter and dual 3G-SDI outputs on the receiver.

    Much like the popular Paralinx Arrow and Arrow Plus, the Tomahawk transmits Full HD video (up to 1080p/60 4:2:2) with less than 1 millisecond delay and is capable of handling up to 4 simultaneous receivers. The transmitter weighs approximately 6.6oz/187g (without antennas) and the receiver weighs 12 oz/340g (without antennas).

    Features:

    • Lightweight Minimalist design for Handheld, Steadicam, Gimbal, and UAV Payload

    • Transmitter features 3G-SDI input and loop-out. Receiver features dual 3G-SDI outputs.

    • Rugged machined-aluminum enclosure for the transmitter and ABS enclosure for receiver

    • Ultra long-range transmission - Up to 2,000 feet (600 meters) *

    • REAL-TIME viewing - Less than 1 millisecond latency

    • Uncompressed full-HD video signal allow critically accurate monitoring

    • Multicast capable (up to 4 receivers per transmitter)

    • 128 bit AES Encryption - Secure transmission

    • Operates on 5gHz frequency band

    • Conforms to major technical and environmental standards including FCC, CE, MIC (TELEC) and RoHS Specifications

     

    Includes:

    • 1 Tomahawk SDI transmitter w/stock antennas
    • 1 Tomahawk receiver w/stock antennas (dual-SDI outputs)
    • 1 PTap to Lemo power cable (18in/45cm)
    • 1 AC power adapter with 2-pin Lemo-type connector (per receiver)
    • 18" BNC Cable (right-angle to right-angle)
    • 1 Remote control and IR cable (for menu access only)
    • 1 mini-USB to USB cable (for firmware updates only)

     

    More Information
    Model No
    Write Your Own Review
    You're reviewing:Paralinx Tomahawk SDI Set
    Your Rating