Sachtler - DV 12 SB
The key to Sachtler’s successful fluid heads is their step switching. Now our innovative SPEEDBALANCE technology enables even faster and finer counterbalance of your camera system. By reducing the minimum payload, the heads’ overall payload range is increased.
The fluid head DV 12 SB is delivered with the Touch & Go® plate 16 (Code No. 1064). It comes with a 1/4” screw and 3/8” screw. Spare camera screws (1/4”/ 3/8”) and a pin screw are stored in the balance plate. The pin screw fits in the center hole of the camera plate. Thus a pin/1/4” screw connection can be achieved if your camera requires this connection. If your camera remains front- or back heavy after going through the necessary centring procedure you may solve this by using the C.O.G plate (Code No. 1063). This plate offers a removed position.The C.O.G. plate can be mounted to either the front or the back. It cannot be operated with pin and 1/4” screw.