Call 770-857-3435

Professional Equipment for Professional Filmmakers.

Teradek Bolt Pro 300 Wireless HD-SDI Transmitter/Receiver Set

Be the first to review this product

Teradek Bolt Pro Multicast Wireless Transmission System is a latency-free wireless transmission system that sends 4:2:2, 1080p60 video at up to 300ft.
SKU: TDS13432

Availability: In stock

Innocinema & SoCal Financing



This Bolt Pro system comes in a set of 1 transmitter and 1 receiver. The transmitter features a loop through SD/HD/3G-SDI output, so you can transmit video, and send the output from the camera to a monitor or deck. The transmitter features an internal battery, that can run the unit for up to 60 minutes, and it features 4-LED indicator lights that indicate battery level. The Bolt Pro system is suitable for exterior and interior shoots, and it features Dynamic Frequency Selection that allows it adjust the frequency bands it is using in real time to avoid interference. This Bolt Pro comes with 1 receiver that feature 2 x SD/HD/3G-SDI outputs, however it can also transmit to a Bolt receiver that features an HDMI output, allowing you to take SDI in, transmit, and output via HDMI or SDI depending on the type of receiver you are using. You can also mix and match SDI & HDMI receiver units, up to a total of 4.


  • 10" Coiled SDI Cable for Transmitter (25.4 cm)
  • Lemo to P-Tap Cable (6 to 28V)
  • 1/4"-20 Thumbscrew
  • 2-Pin Lemo to 18W AC Power Adapter

Additional Info

Additional Info

Model 10-0920
In Depth
Input SD/HD/3G-SDI
Output Looping 3G-SDI
Resolution Up to 1080p60
Range 300.0' (91.4 m)
Power 4.5 W
Battery Li-Ion battery with 60 minutes run time
Cable Lemo 6 to 28 VDC input (Pin 1 GND, Pin 2 +DC, 0B 302 series Lemo)
Encryption AES128
Audio 2-channel
Chassis Milled aluminum
Mounting Multiple mounting options with 1/4"-20 holes
Mount Accessory shoe mount
Temperature 32 to 122°F (0 to 50°C)
Dimensions 2.3 x 4.3" (58.0 x 110.0 mm)
Weight 7.0 oz (198.5 g)
Output 2 x SD/HD/3G-SDI
Resolution Up to 1080p60
Power 6 W
Cable Lemo 6 to 28VDC
Mounting 1/4"-20 through-hole
Dimensions 2.9 x 4.3" (75.0 x 110.0 mm)


Write Your Own Review

Only registered users can write reviews. Please, log in or register



Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)